{"product_id":"icon-2021-ford-bronco-hoss-1-0-front-exp-coilover-2-5in-48601","title":"ICON 2021+ Ford Bronco Hoss 1.0 Front EXP Coilover 2.5in - 48601","description":"\u003cp\u003eEXP Series shocks utilize a one-piece digressive piston design and are custom tuned for the Bronco in conjunction with their stock coil springs to maximize damping performance and provide unsurpassed ride quality, on and off-road. The increased piston size and shock oil volume provided by the 2.5-inch diameter aluminum body also provide superior heat dissipation compared to the smaller, steel bodied OE shocks, resulting in longer-lasting shock performance over prolonged use at higher speeds and through rougher terrain. For those who would like to further tune their suspension, EXP shocks are fully re-valvable (and rebuildable) by any qualified shock technician, with parts available from ICON.\u003c\/p\u003e\n\u003cp\u003eAPPLICATION NOTE #266: Due to increased wheel travel and lift height provided by these coilovers, ICON upper control arms with Delta Joint Pro, part numbers 48400DJ or 48500DJ, are recommended. Other aftermarket front upper control arms may not be compatible and it is the duty of the installer to verify fitment. Failure to cycle suspension and check for ball joint bind issues may lead to component failure and\/or injury.\u003c\/p\u003e\n\u003cp\u003eRecommended Aftermarket Tires: 35\" x 12.50\" (Requires high clearance crash bars, ICON part number 42000. 37\" tire packages require coilover bump stop spacers along with trimming and modifications)\u003c\/p\u003e\n\u003cp\u003eAPPLICATION NOTE #25: Factory UCA's will not align properly past 2” of lift. Above 2” of lift an aftermarket UCA is recommended.\u003c\/p\u003e\n\u003cp\u003eAPPLICATION NOTE #138: Recommended crash bars part #42000 on Non-Sasquatch equipped vehicles when running 35\" tires\u003c\/p\u003e\n\u003cp\u003eAPPLICATION NOTE #55: Shocks are fully serviceable. Coilover heights indicated are for a stock equipped vehicle\u003c\/p\u003e\n\u003cp\u003eAPPLICATION NOTE #155: Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/p\u003e\n\u003cp\u003eAPPLICATION NOTE #139: When running 37\" tires crash bar removal may be required but is not recommended\u003c\/p\u003e\n\u003cp\u003eAPPLICATION NOTE #147: When running 37\" tires use bump stop spacer kit part # 611082 in the front\u003c\/p\u003e\n\u003cp\u003eTECH NOTE: EXP Coilovers are sold individually. A quantity of 2 are required per vehicle.\u003c\/p\u003e\n\u003cp\u003eRecommended Aftermarket Wheels: ICON Alloys - 17x8.5\" w\/ 5.75” Backspace \/ 25mm Offset\u003c\/p\u003e\n\u003cp\u003eAPPLICATION NOTE #269: Only fits Ford Bronco equipped with HOSS 1.0 Suspension Package\u003c\/p\u003e\n\u003cp\u003eRecommended Aftermarket Wheels: ICON Alloys - 18x9\" w\/ 6.00\" Backspace \/ 25mm Offset\u003c\/p\u003e\n\u003cp\u003eAPPLICATION NOTE #10: Will not fit Bronco Raptor\u003c\/p\u003e\n\u003cp\u003eTECH NOTE: Not compatible with Bronco Raptor\u003c\/p\u003e\n\u003cp\u003eOEM Wheels \u0026amp; Tires Fitment: Yes\u003c\/p\u003e\n\u003ch4\u003eFeatures \u0026amp; Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOne-piece, impact extruded, hard anodized aluminum cylinder offer excellent corrosion resistance and consistent finish\u003c\/li\u003e\n\u003cli\u003eInverted shaft up design featuring 7\/8” diameter, induction hardened, chrome plated shaft\u003c\/li\u003e\n\u003cli\u003eAdjustable ride heights from 1.375-3” of front lift over stock with the use of snap ring\u003c\/li\u003e\n\u003cli\u003eVehicle specific design for 2021-2026 Ford Bronco with HOSS 1.0 Suspension Package\u003c\/li\u003e\n\u003cli\u003ePTFE lined spherical bearing for extended longevity and minimal deflection\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061 aluminum components with a black anodized finish\u003c\/li\u003e\n\u003cli\u003e100% Bolt-on - no cutting or welding necessary for installation\u003c\/li\u003e\n\u003cli\u003eVehicle specific tuned for superior shock damping and control\u003c\/li\u003e\n\u003cli\u003e2.5 Aluminum Series Shock with Internal Reservoir\u003c\/li\u003e\n\u003cli\u003eHigh strength alloy CNC machined lower bar pin\u003c\/li\u003e\n\u003cli\u003eUtilizes factory coil and coil hardware\u003c\/li\u003e\n\u003cli\u003eFully rebuildable and re-tunable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eDownloads \u0026amp; Resources\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/7e3094e3375f06dbd23d1b514a55a004.PDF\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":46481026547848,"sku":"ico48601","price":505.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/2491\/6104\/files\/ba5309917edbe64070a276b6915c8dcf_a42a4cf9-8056-4cbb-9891-240f5e11c89b.jpg?v=1788467912","url":"https:\/\/www.allianceracing.com\/products\/icon-2021-ford-bronco-hoss-1-0-front-exp-coilover-2-5in-48601","provider":"Alliance Racing","version":"1.0","type":"link"}