{"product_id":"icon-2022-toyota-tundra-2-3-25in-stage-1-3-0-tubular-suspension-system-k53211t","title":"ICON 2022+ Toyota Tundra 2-3.25in Stage 1 3.0 Tubular Suspension System - K53211T","description":"\u003cp\u003eThis Stage 1 system features the 2022-2025 Toyota Tundra VS 3.0 Series remote reservoir front coilovers equipped with CDC Valves. These adjustable coilovers allow up to 2-3.25” of lift height adjustability over stock when using the ICON tubular front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations. The larger 3.0 Series shocks offer 50% more piston surface area in the ride zone of the shock's travel, and 100% in the “Bump Zone”, compared to 2.5 Series shocks. The multi-stage hydraulic Bump Zone exponentially increases bottom-out resistance as the shock travels through the last 40% of travel, keeping vehicle dynamics in check during those hard hits or unexpected obstacles. The included ICON CDC Valves are externally adjustable valves that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges. Additionally, ICON’s Vehicle-specific shock length yields the maximum travel possible (up to 40% increase over stock), all translating into increased stability and vehicle control at the extremes of off-road use, with benefits also making themselves apparent in on-road driving conditions.\u003c\/p\u003e\n\u003cp\u003eTECH NOTE: Included rear shocks are compatible with 0-1.5\" of rear lift over stock on models equipped with rear coil springs without TRD suspension package. Rear shocks are compatible with 0-1\" of rear lift over stock on models equipped with rear coil springs with TRD suspension package and TRD Pro.\u003c\/p\u003e\n\u003cp\u003eAPPLICATION NOTE #149: For 4WD models without TRD Off-Road package ICON recommends using ICON Diff Drop (Part# 55156) or using Toyota TRD axles (Part# 434200C020 Driver \/ 434100C020 Pass). Failure to do so could result in front axle damage. Not required for TRD Pro.\u003c\/p\u003e\n\u003cp\u003eAPPLICATION NOTE #141: Tundra\/Sequoia equipped with automatic leveling headlights or Load-Leveling Rear Height Control Air Suspension, part # 55153 is also required\u003c\/p\u003e\n\u003cp\u003eAPPLICATION NOTE #85: Advertised lift height ranges are for a stock equipped vehicle. Increasing weight of vehicle due to accessories will alter lift lange.\u003c\/p\u003e\n\u003cp\u003eTECH NOTE: Most Tundra sub-models equipped with i-Force MAX hybrid engine will have front lift height range of 2-2.75\" over stock\u003c\/p\u003e\n\u003cp\u003eTECH NOTE: Most Tundra sub-models equipped with i-Force gasoline engine will have front lift height range of 2-3.25\" over stock\u003c\/p\u003e\n\u003cp\u003eAPPLICATION NOTE #142: Not compatible with vehicles equipped with Load-Leveling Rear Height Control Air Suspension.\u003c\/p\u003e\n\u003cp\u003eTECH NOTE: Tundra SR5 equipped with TRD Sport Suspension package will have lift height range of 3-4.5” over stock\u003c\/p\u003e\n\u003cp\u003eAPPLICATION NOTE #55: SHOCKS ARE FULLY SERVICEABLE. LIFT HEIGHTS INDICATED ARE FOR A STOCK EQUIPPED VEHICLE.\u003c\/p\u003e\n\u003cp\u003eAPPLICATION NOTE #155: Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/p\u003e\n\u003cp\u003eRecommended Aftermarket Tires: 35\" x 12.50\" (Minor fender trimming and modifications may be required)\u003c\/p\u003e\n\u003cp\u003eAPPLICATION NOTE #153: Not compatible with Adaptive Variable Suspension (AVS) equipped vehicles\u003c\/p\u003e\n\u003cp\u003eAPPLICATION NOTE #171: If equipped with TRD aluminum skid plate part # 55164 is also required\u003c\/p\u003e\n\u003cp\u003eRecommended Aftermarket Wheels: ICON Alloys - 17x8.5\" w\/ 5.75” Backspace \/ 25mm Offset\u003c\/p\u003e\n\u003cp\u003eTECH NOTE: Tundra TRD Pro will have front lift height range of 0-1.75\" over stock\u003c\/p\u003e\n\u003cp\u003eOEM Wheels \u0026amp; Tires Fitment: Yes\u003c\/p\u003e\n\u003ch4\u003eFeatures \u0026amp; Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e2.5 Aluminum Series rear remote reservoir shocks provide increased performance, 20% increase in wheel travel, and balanced tune with coilovers\u003c\/li\u003e\n\u003cli\u003eAll shock absorbers equipped with CDC Valves for 10 settings of compression damping adjustment, from soft to hard\u003c\/li\u003e\n\u003cli\u003eAdjustable front ride heights from 2-3.25” of front lift over stock when used with included tubular UCAs\u003c\/li\u003e\n\u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n\u003cli\u003eTubular rear upper and lower links improve rear end articulation and allow for pinion angle adjustment\u003c\/li\u003e\n\u003cli\u003eAllows for up to 40% increase in front wheel travel over stock without overstressing OE components\u003c\/li\u003e\n\u003cli\u003eTubular UCAs for added strength, durability, and alignment correction for better drivability\u003c\/li\u003e\n\u003cli\u003e3.0 Series front coilovers with ICON’s multi-stage, tunable hydraulic “Bump Zone”\u003c\/li\u003e\n\u003cli\u003eIncluded sway bar drop brackets reduce bind in OE sway bar links\u003c\/li\u003e\n\u003cli\u003eAll ICON shock absorbers are fully rebuildable and re-tunable\u003c\/li\u003e\n\u003cli\u003eVehicle specific design for 2022-2025 Toyota Tundra\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":46481010589832,"sku":"icoK53211T","price":7023.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/2491\/6104\/files\/75f93af549f4dddd36efd6ca527fb483_e1631c49-6ffa-4cb9-bdd5-214b53271802.jpg?v=1788467694","url":"https:\/\/www.allianceracing.com\/products\/icon-2022-toyota-tundra-2-3-25in-stage-1-3-0-tubular-suspension-system-k53211t","provider":"Alliance Racing","version":"1.0","type":"link"}