{"product_id":"icon-23-24-toyota-sequoia-3-4-5in-stage-10-suspension-system-billet-k53240s","title":"ICON 23-24 Toyota Sequoia 3-4.5in Stage 10 Suspension System - Billet - K53240S","description":"\u003cp\u003eThis Stage 10 system features the 2023-2026 Toyota Sequoia VS 2.5 Series remote reservoir front coilovers equipped with CDC Valves. These adjustable coilovers allow up to 3-4.5” of lift height adjustability over stock when using the ICON billet front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock components yield the maximum travel possible (up to 40% increase over stock) along with superior ride quality and suspension performance both on- and off-road. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. The included ICON CDC Valves are externally adjustable valves that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges.\u003c\/p\u003e\n\u003cp\u003eAPPLICATION NOTE #602: Most Sequoia submodels will have front lift height range of 3-4.5” over stock and 4\" of rear lift over stock. Submodels equipped with TRD Off-Road Package and TRD Pro will have a front lift height range of 1-2.5\" over stock and 2\" of lift over stock in the rear. If shorter rear ride heights are desired, consider kit part number K53240.\u003c\/p\u003e\n\u003cp\u003eAPPLICATION NOTE #149: For 4WD models without TRD Off-Road package ICON recommends using ICON Diff Drop (Part# 55156) or using Toyota TRD axles (Part# 434200C020 Driver \/ 434100C020 Pass). Failure to do so could result in front axle damage. Not required for TRD Pro.\u003c\/p\u003e\n\u003cp\u003eAPPLICATION NOTE #141: Tundra\/Sequoia equipped with automatic leveling headlights or Load-Leveling Rear Height Control Air Suspension part # 55153 is also required\u003c\/p\u003e\n\u003cp\u003eAPPLICATION NOTE #85: Advertised lift height ranges are for a stock equipped vehicle. Increasing weight of vehicle due to accessories will alter lift range.\u003c\/p\u003e\n\u003cp\u003eAPPLICATION NOTE #142: Not compatible with vehicles equipped with Load-Leveling Rear Height Control Air Suspension.\u003c\/p\u003e\n\u003cp\u003eAPPLICATION NOTE #55: Shocks are fully serviceable. Lift heights indicated are for a stock equipped vehicle.\u003c\/p\u003e\n\u003cp\u003eAPPLICATION NOTE #155: Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install\u003c\/p\u003e\n\u003cp\u003eRecommended Aftermarket Tires: 35\" x 12.50\" (Minor fender trimming and modifications may be required)\u003c\/p\u003e\n\u003cp\u003eAPPLICATION NOTE #153: Not compatible with Adaptive Variable Suspension (AVS) equipped vehicles\u003c\/p\u003e\n\u003cp\u003eAPPLICATION NOTE #171: If equipped with TRD aluminum skid plate part # 55164 is also required\u003c\/p\u003e\n\u003cp\u003eRecommended Aftermarket Wheels: ICON Alloys - 17x8.5\" w\/ 5.75” Backspace \/ 25mm Offset\u003c\/p\u003e\n\u003cp\u003eRecommended Aftermarket Wheels: ICON Alloys - 18x9\" w\/ 6” Backspace \/ 25mm Offset\u003c\/p\u003e\n\u003cp\u003eOEM Wheels \u0026amp; Tires Fitment: Yes\u003c\/p\u003e\n\u003ch4\u003eFeatures \u0026amp; Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDual rate rear coil springs improve performance and ride quality while providing 2\" or 4\" of rear lift, depending on the vehicle's stock suspension package\u003c\/li\u003e\n\u003cli\u003e2.5 Series front coilovers with remote reservoirs for superior damping and vehicle control along with improved shock cooling\u003c\/li\u003e\n\u003cli\u003eBillet aluminum UCAs for added strength, durability, and on-vehicle caster\/camber adjustment for optimum drivability\u003c\/li\u003e\n\u003cli\u003eAll shock absorbers equipped with CDC Valves for 10 settings of compression damping adjustment, from soft to hard\u003c\/li\u003e\n\u003cli\u003eBillet rear upper and lower links improve rear end articulation and allow for on-vehicle pinion angle adjustment\u003c\/li\u003e\n\u003cli\u003eOn-vehicle adjustable rear track bar properly centers rear axle while also improving rear suspension performance\u003c\/li\u003e\n\u003cli\u003e2.5 Aluminum Series rear remote reservoir shocks provide increased performance and balanced tune with coilovers\u003c\/li\u003e\n\u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n\u003cli\u003eAdjustable front ride heights from 3-4.5” of front lift over stock\u003c\/li\u003e\n\u003cli\u003eIncluded sway bar drop brackets reduce bind in OE sway bar links\u003c\/li\u003e\n\u003cli\u003eAllows for full wheel travel without overstressing OE components\u003c\/li\u003e\n\u003cli\u003eAll ICON shock absorbers are fully rebuildable and re-tunable\u003c\/li\u003e\n\u003cli\u003eVehicle specific design for 2023-2026 Toyota Sequoia\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":46481035559048,"sku":"icoK53240S","price":8640.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/2491\/6104\/files\/75f93af549f4dddd36efd6ca527fb483_c639384a-05e3-431c-91cf-d613894318b1.jpg?v=1788468032","url":"https:\/\/www.allianceracing.com\/products\/icon-23-24-toyota-sequoia-3-4-5in-stage-10-suspension-system-billet-k53240s","provider":"Alliance Racing","version":"1.0","type":"link"}