Under 100

The 81139 is inexpensive, portable, and very accurate. It has a simple leveling adjustment of +/-3deg. Housed in a durable, non-magnetic casing with a magnetic head that attaches firmly to rotors or...

For steer and drive axles. This wheel centering sleeve slide s over the studs and seats against the wheel face. This slee ve stays on the wheel and helps to reduce "wheel-off"...

Designed for the low-profile clamps used to hold C.V. Boots on FWD vehicles. The 02099 comes complete with a ratchet. We recommend using this tool when istalling our #87365 Crown victoria camber...

For Hunter Model # 201,205--- Hunter Part # V302-07-167--- 12 cut edges ---- negative rake 10 bits per pack. California Residents WARNING Product appearance and features may vary in the market as...

ALL TOOL 747-----3 CUT EDGES ----------POSITIVE RAKE 10 bits per pack. California Residents WARNING Product appearance and features may vary in the market as design changes, improvements and modifications are implemented. Features...

For Pro-Cut Model 610 On-The-Car---- Pro-Cut Part# 50-741 Positive rake carbide---- 3 cut edges----positive rake for Fords 6 bits per pack. California Residents WARNING Product appearance and features may vary in the...

RIGHT HAND TOOL HOLDER 3/8" Square Shank Fits all FMC/JOHN BEAN Brake Lathes and ACCU-TURN. Complete with one carbide Insert No. 407----FMC/JOHN BEAN, ACCU-TURN California Residents WARNING Product appearance and features may...

For steer and drive axles. This wheel centering sleeve slide s over the studs and seats against the wheel face. This slee ve stays on the wheel and helps to reduce "wheel-off"...

For Pro-Cut Model 610 On-The-Car Lathe---- Pro-Cut Part # 50-701---- 3 cut edges ---- positive rake for Fords 10 bits per pack. California Residents WARNING Product appearance and features may vary in...

LEFT HAND TOOL HOLDER 3/8" Square Shank Fits all FMC/JOHN BEAN Brake Lathes and ACCU-TURN. Complete with one carbide Insert No. 407----FMC/JOHN BEAN, ACCU-TURN California Residents WARNING Product appearance and features may...

For Rels Models 204C,204D,204S,205DC,415- Rels part # 29687V For Van Norman Models 243XV,204C,204D,204S,205DC,415 Van Norman Part # 129687,866561 ----3 cut edges----positive rake 10 bits per pack. California Residents WARNING Product appearance and...

A handy chromoly steel compressor designed to fit inside most coil springs with an internally mounted shock. Will accomodate spring lengths from 8-1/4" to 14". It can be used on any coil...

These sockets are used on Chrylser products with screw in ball joints. They have a 3/4" square drive and are four-point, a perfect fit for our ball joints. California Residents WARNING Product...

An excellent tool for fast camber-caster changes on most older Chrysler and Ford vehicle models w/SLA (Short-Long Arm) style suspensions. A zinc plated finish will provide years of trusted service and also...

For steer and drive axles. This wheel centering sleeve slide s over the studs and seats against the wheel face. This slee ve stays on the wheel and helps to reduce "wheel-off"...

498 removes front hubs on vehicles with independent front suspensions. Remove screw and use it with 499 axle puller to remove axles in compact cars. 498 set includes 498-1, 498-2 and 498-3...

Set includes the Dual Socket Inner Tie Rod Removal Tool along with 1-3/16", 1-5/16" and 1-7/16" hex tools. CAUTION: Not for use with impact wrenches (air tools). impact wrenches (air tools). California...

This tool is specifically designed for use on the Ford Super duty trucks as well as most other light trucks and vans as well. The extra long bar gives you maximum leverage...

Five tools in one, this handy kit consists of three drop forged forks and two handles. One handle is for use with a hammer and one is designed to fit an air...

RECEIVING SOCKET FOR 40910 California Residents WARNING Product appearance and features may vary in the market as design changes, improvements and modifications are implemented. Downloads & Resources Photo - Primary Link To...

Stripped 18mm lugnuts/Corvette,GM N&F body wheels Utilized in 41000 set. California Residents WARNING Product appearance and features may vary in the market as design changes, improvements and modifications are implemented. Downloads &...

High quality carbide rotary files, ideal for elongating strut holes on many vehicles. Use when installing 82110, 82120,and 87350 adjusters. May be used with 1/4" or 3/8" drills at high speeds. Available...

Removes tie rod ends with a straight, fast, firm pull. Makes installation of the 87330 camber/toe kit easier. It has a 2-1/4" reach adn a 2-1/2" spread. Also for pressing bushings. Replacement...

Ford Tauras & Mercury station wagons have a sprocket type cam to adjust rear toe. This tool engages the sprocket and allows the technician to turn the cam for required adjustments. California...

For steer and drive axles. This wheel centering sleeve slide s over the studs and seats against the wheel face. This slee ve stays on the wheel and helps to reduce "wheel-off"...

For steer and drive axles. This wheel centering sleeve slide s over the studs and seats against the wheel face. This slee ve stays on the wheel and helps to reduce "wheel-off"...

For steer and drive axles. This wheel centering sleeve slide s over the studs and seats against the wheel face. This slee ve stays on the wheel and helps to reduce "wheel-off"...

Used on any brake lathe and with any ventilated rotor, they suppress vibration and noise. Segmented silencer is made of the finest latex rubber tubing with four (4) steel tubes to quiet...

Replacement Hammer for item #499 Flange Axle Puller. Replacement part only! Product appearance and features may vary in the market as design changes, improvements and modifications are implemented. Features & Benefits Fits...

5/8" Rotary File. ......CAUTION: Always wear safety glasses when using cutting or grinding tools and equipment. California Residents WARNING Product appearance and features may vary in the market as design changes, improvements...

The sleeves are designed to match the angle of the yoke on the axle housing to insure proper installation. Sleeve set 23580 is to be used with our Dodge & Jeep Offset...

Replacement C-Frame for SPC #40910, #40915 and 40920 extractor / bushing sets. Product appearance and features may vary in the market as design changes, improvements and modifications are implemented. Features & Benefits...

Designed for the PRO CUT on car lathes this silencer fits on top of the cutting tools, deflecting chips and dampening the chatter series. California Residents WARNING Product appearance and features may...

Flange type axle puller can be used as a regular wheel puller or hub puller, as well as a flange type puller. The bolt circle range is from 4-1/2" to 5-1/2", which...

For Rels Model SW504 Swing Arm- Rels Part # SW4236-15---- For Snap-On Models YA180,YA281---- 3 cut edges----positive rake for rotor & drum 10 bits per pack. California Residents WARNING Product appearance and...

EZ ON Wheel & Brake Drum Centering Sleeves (6/pkg) centers both steer wheels and brake drums to minimize wheel vibrations, brake pedal pulsations, and wheel hop. The "threadless" sleeve design allows quick...