Flowmaster 3.00in.IN(C)/OUT(C) FlowFX Round 14in. BO Muffler - 71419
Flowmaster's Flow FX series mufflers are for the enthusiast who is looking for an economically priced performance muffler that delivers a moderate sound level and tone, both inside and outside the vehicle....
Flowmaster 3.00in.IN(O)/OUT(C) FlowFX Muffler - 71229
Flowmaster's Flow FX series mufflers deliver a moderate performance tone for the enthusiast looking for an exhaust note that is different from the "chambered" muffler sound. The interior features a large 3.00-inch...
Flowmaster 3.5 IN(C)/2.5 OUT(D) 5X8X18 FlowFX Muffler - 72587
Flowmaster's Flow FX series mufflers deliver a moderate performance tone for the enthusiast looking for an exhaust note that is different from the "chambered" muffler sound. The interior features a large 3.50-inch...
Flowmaster 3.5 IN(C)/OUT(C) 5X8X18 FlowFX Muffler - 74151
Flowmaster's Flow FX series mufflers deliver a moderate performance tone for the enthusiast looking for an exhaust note that is different from the "chambered" muffler sound. The interior features a large 3.50-inch...
Flowmaster 3.5 IN(O)/OUT(O) 50 Series BB Muffler - 53553
The 50 Series Big Block muffler is made for more than just big cubic inch engine applications. Its large case size with internal tuning chamber provides mileage and power gains along with...
Flowmaster 3.5 IN(O)/OUT(O) 50 Series Heavy Duty Muffler - 953558
Designed primarily for today's heavy duty gas and diesel trucks, this muffler will deliver improved performance, throttle response and mileage. Featuring a deeper, moderate tone with minimal resonance, it is ideal for...
Flowmaster 3.5 IN(O)/OUT(O) 50 Series Heavy Duty SS Muffler - 853558
Flowmaster's stainless steel 50 Series HD muffler is designed for today's heavy duty gas and diesel trucks. This muffler delivers improved performance, throttle response and mileage. The 50 HD features a deep,...
Flowmaster 3.50 IN(O)/OUT(O) Super 40 SS Muffler - 853548
Developed from our Top Ten race muffler lineup for use on the street/strip, the Super 40® features Flowmaster's Delta Flow® technology. It's larger case profile provides the best of both worlds of...
Flowmaster 3.5in. 4 PC. Universal. Tailpipes - 15903
Designed for fabricating a mandrel-bent tailpipe on most trucks, vans and SUV's. Incorporates (4) 3.50-inch mandrel bends and straight lengths of tubing for a combined total 12-feet of Aluminized steel tubing with...
Flowmaster 3.5in. Dual X7.50in.X2.50in. SS Tip Roll - 15369
Exhaust tip, logo embossed polished stainless, rolled edge angle cut, 3.50 in. dual pipe diameter x 2.50 in. x 7.50 in., weld on. Sold individually. Fits 2-1/2 inch tailpipe Features & Benefits...
Flowmaster 3.5in.X 12in.X 3in.SS Tip Straight Roll - 15363
Exhaust tip, logo embossed polished stainless, rolled edge angle cut, 3.50 in. tip diameter x 3.00 in. pipe diameter x 12.00 in. length, clamp on. Sold individually. Fits 3 inch tailpipe Features...
Flowmaster 3.5in.X3in. Collector Ball Flange Kit - 15923
This header collector ball flange kit takes the place of typical three bolt flange type connections and allows for a leak free and gasket free connection. Features one end with a 3.50-inch...
Flowmaster 3IN (O)/3OUT (C) 40 Series Muffler - 43041
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you're looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized...
Flowmaster 3IN (O)/OUT (O) 40 Series Muffler - 43043
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you're looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized...
Flowmaster 3IN(C)/2.5OUT(D) 40 Series SS Muffler - 80430402
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you're looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S...
Flowmaster 3IN(C)/2.5OUT(D) Super 10 SS Muffler - 8430152
Super 10™ Series 409S stainless steel, single chamber mufflers. Intended for customers who desire the loudest and most aggressive sound they can find. Because these mufflers are so aggressive, they are recommended...
Flowmaster 3in. SS Scavenger X-Pipe Kit - 815933
Our universal stainless steel Scavenger X-Pipe kits mount ahead of the mufflers in place of a traditional H-pipe and can provide significant torque improvement. Commonly referred to as an X-Pipe, not all...
Flowmaster 3in.IN(C)/2.5in. Dual OUT 40 Muffler - 430402
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you're looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized...
Flowmaster 3in.IN(C)/2.5in.OUT(D) 4x9x14 FlowFX Muffler - 72198
Flowmaster's Flow FX series mufflers deliver a moderate performance tone for the enthusiast looking for an exhaust note that is different from the "chambered" muffler sound. The interior features a large 3.00-inch...
Flowmaster 3in.IN(C)/2.5in.OUT(D) 4x9x18 FlowFX Muffler - 72288
Flowmaster's Flow FX series mufflers deliver a moderate performance tone for the enthusiast looking for an exhaust note that is different from the "chambered" muffler sound. The interior features a large "straight-through"...
Flowmaster 3in.X 12in.X 2.5in.SS Tip Straight Roll - 15361
Exhaust tip, logo embossed polished stainless, rolled edge angle cut, 3.00 in. tip diverter X 2.50 in. pipe diameter X 12.00 in. length, clamp on. Sold individually. Fits 2-1/2 inch tailpipe Features...
Flowmaster 3in.X 13in.X 2.5in.SS Tip Straight - 15362
Exhaust tip, logo embossed polished stainless, straight edge angle cut, 3.00 in. tip diameter X 2.50 in. pipe diameter X 13.00 in. length, weld on. Sold individually. Fits 2-1/2 inch tailpipe Features...
Flowmaster 3in.X2.5in. Collector Ball Flange Kit - 15925
This header collector ball flange kit takes the place of typical three bolt flange type connections and allows for a leak free and gasket free connection. Both ends feature inside diameter (i.d.)...
Flowmaster 4in. Universal. 4-PC Tailpipes - 15929
Designed for fabricating a mandrel-bent tailpipe on most trucks, vans and SUV's. Incorporates (4) 4.00-inch mandrel bends and straight lengths of tubing for a combined total 12-feet of Aluminized steel tubing with...
Flowmaster 4in.X 7.5in.X 2.5in.SS Tip Straight Roll - 15365
Exhaust tip, logo embossed polished stainless, double wall rolled edge angle cut, 4.00 in. tip diameter x 2.50 in. pipe diameter x 7.50 in. length, clamp on. Sold individually. Fits 2-1/2 inch...
Flowmaster 4X8 Universal Resonator 3 in. O/O - 15110
Tuned resonator designed to be used in conjunction with Flowmaster mufflers for improved sound reduction. Helps eliminate interior resonance. Universal Resonator - Not a direct fit. Some adaptation required. Features & Benefits...
Flowmaster 55-57 Chevrolet 2.5in. American Thunder SS Crossmember-Back Exhaust System - 817174
For the person who is looking for a complete Crossmember-Back dual exhaust system for your 1955-1957 Chevy coupes and sedans. This American Thunder® system is manufactured from 2.50-inch mandrel-bent stainless steel for...
Flowmaster 55-57 Chevrolet Tailpipes - 15816
These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the...
Flowmaster 57-74 Corvette STREET ROD Scavenger Series Elite Header - 814120
Flowmaster's Scavenger Series Elite shorty headers are designed to replace restrictive factory cast iron manifolds. These high quality headers are manufactured from stainless steel and are ceramic coated for maximum durability. They...
Flowmaster 59-64 Impala Pre-Bent Tailpipe Kit - 81055
These pre-bent stainless steel tailpipes are made specifically for use with Flowmaster system part# 817413 designed for headers back to the rear differential on all 1959-1964 Chevrolet Impala, Biscayne & Bel Air...
Flowmaster 62-67 Chevrolet Nova 2.5in. American Thunder Kit SS Crossmember-Back Exhaust System - 817673
Flowmaster's American Thunder Crossmember-Back exhaust system for the 1962-1967 Chevrolet Chevy II/Nova is perfect for the person looking for an aggressive sound level inside and outside of the car, with all of...
Flowmaster 62-74 Mopar B-BODY 3 in. Tailpipes - 15823
These Flowmaster pre-bent tailpipes fit the popular 1962 to 1974 Dodge/Plymouth B-Body cars. The tailpipes are 3-inch, 16-gauge aluminized steel and mandrel bent to allow for better flow of the exhaust pulses...
Flowmaster 62-74 Mopar B-BODY Tailpipes - 15806
These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the...
Flowmaster 63-66 GM C10 American Thunder SS Crossmember-Back Exhaust System - 817937
This American Thunder exhaust system is specifically designed for 1963-1966 Chevrolet C10 and GMC 1000 series 2-wheel drive, non X-Frame V8 trucks without the torsion bar front suspension. The system is perfect...
Flowmaster 63-74 Mopar A-BODY 2.5 in. Tailpipes - 15826
These Flowmaster pre-bent tailpipes fit the popular 1963 to 1974 Dodge/Plymouth A-Body cars. The tailpipes are 2.5-inch, 16-gauge aluminized steel and mandrel bent to allow better flow of the exhaust pulses as...
Flowmaster 64-66 Mustang V8 American Thunder Crossmember-Back Exhaust System - 17273
This American Thunder® Crossmember-Back exhaust system is custom designed for the 1964-1966 Ford Mustang and is perfect for the person looking for a complete 2.50-inch dual exhaust system with a moderately aggressive...
