aFe

The simple swap of the rear section of your factory exhaust to the MACH Force Xp muffler delete system brings performance gains, a custom look, and a smooth sound. Features & Benefits...

Dynamic Air Scoops lower air intake temperatures by forcing more cool air from the front grilles into the factory intake tract. These scoops are constructed from 100% twill weave carbon fiber (no fiberglass)...

aFe's Mach Force-Xp axle-back exhaust system delivers form and function to your Jeep JL. This efficient, 2 1/2" mandrel-bent Hi-Tuck system delivers extra ground clearance when off-roading by replacing the stock, low-hanging...

MACH Force-Xp 3 IN 409 Stainless Steel Cat-Back Hi-Tuck Exhaust System Jeep Gladiator (JT) 20-26 V6-3.6L

Aggressive Sound: A free-flowing, transverse muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The muffler is finished with a high-temp powder-coated...

The aFe POWER SCORCHER BLUE Power module is the next generation of Plug and Play electronic module technology. It is the fastest way to safely gain significant horsepower, torque and improve drivability...

This system is constructed of 3 IN mandrel-bent 409 stainless steel tubing for maximum strength and durability. This system features a high-flow 409 stainless steel muffler, producing a deep sound with minimal...

Oversized Tube and Fin Core: This BladeRunner Street Series Radiator features a 2-3/4" thick tube and fin core which provides greater heat dissipation and better coolant flow than the factory radiator for...

This cat-back exhaust system is constructed of 3" to 2-1/2" mandrel-bent brushed finish 304 stainless steel tubing for maximum strength and durability. This system features a high-flow stainless steel muffler, producing a...

This 7” tall 360-degree radial flow air filter features a 5-1/2" by 7-1/2" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive...

If you want proven performance gains, more ground clearance and sound from your Jeep JL 3.6L 2 or 4 door, this Mach Force-XP cat-back exhaust system is what you need. 2-1/2" mandrel-bent...

This replacement catalytic converter is built to last. Its direct-fit design features mandrel-bent stainless steel tubing for long-lasting corrosion resistance and strength. Features & Benefits 100% MIG-Welded Stainless Steel Construction EPA Compliant...

This cat-back exhaust system is constructed of 3" to 2-1/2" mandrel-bent brushed finish 304 stainless steel tubing for maximum strength and durability. This system features a high-flow stainless steel muffler, producing a...

Replace your factory system with the Takeda cat-back exhaust system. Featuring a high-flow muffler, smooth transition bends, and dual stainless steel tips, there is no question this exhaust brings better performance and...

Replace your factory system with the Takeda cat-back exhaust system. Featuring a high-flow muffler, smooth transition bends, and dual stainless steel tips, there is no question this exhaust brings better performance and...

Performance Gains: This system produced gains of up to +10 horsepower and +11 lbs. x ft. torque, as measured on our in-house dyno. 3" 304 Stainless Steel Construction: This cat-back exhaust system...

Add more power and sound to your Challenger with this MACH Force-Xp cat-back system. Dual 3" mandrel-bent, MIG welded, 304 stainless steel tubing with x-pipe and crossover balance tube keeps exhaust flowing...

Automobiles in the 21st century have replaced the more conventional throttle cable technology for an ECM (Electronic Control Module) that translates pedal travel into electronic signals in order to provide power to...

Performance Gains: This system produced gains of up to +8 horsepower and +9 lbs. x ft. torque, as measured on our in-house dyno. 3" 304 Stainless Steel Construction: This axle-back exhaust system...

Performance Gains: This system produced gains of up to +10 horsepower and +11 lbs. x ft. torque, as measured on our in-house dyno. 3" 304 Stainless Steel Construction: This cat-back exhaust system...

Whether you are bounding off-road or racing to soccer practice, aFe POWER's MACH Force-Xp cat-back exhaust system for your Toyota 4Runner with the V6-4.0L engine will get you there with speed and...

The Bladerunner charge pipes produce 20 hp and 63 lbs./ft/ torque and outflow the factory tubes by 45 percent. With the increased flow of this Charge Pipe it will reduce you exhaust...

The Bladerunner charge pipes produce 20 hp and 63 lbs./ft/ torque and outflow the factory tubes by 45 percent. With the increased flow of this Charge Pipe it will reduce you exhaust...

Automobiles in the 21st century have replaced the more conventional throttle cable technology for an ECM (Electronic Control Module) that translates pedal travel into electronic signals in order to provide power to...

The aFe POWER SCORCHER BLUE Power module is the next generation of Plug and Play electronic module technology. It is the fastest way to safely gain significant horsepower, torque and improve drivability...

Introducing an all new Rebel Series Dual Center Exit Cat-Back exhaust system for the Jeep Wrangler (JK) with V6-3.6L/3.8L engine. This unique Rebel Series exhaust system is designed with dual center exit...

aFe POWER Vulcan Series Cat-Back Exhaust System is engineered to increase exhaust flow, improve performance, and deliver an aggressive exhaust tone with premium styling for the Jeep Gladiator V6-3.6L. Constructed from 3-inch...

Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency. Silver Bullet...

Constructed with 100-percent polyurethane boxed frame, this high flow, oiled OE replacement performance filter will outflow the stock filter for improved horsepower and torque. Five layers of progressively finer mesh cotton gauze...

Automobiles in the 21st century have replaced the more conventional throttle cable technology for an ECM (Electronic Control Module) that translates pedal travel into electronic signals in order to provide power to...

This Takeda "muffler-delete" axle-back exhaust system delivers power, sound, and good looks. Constructed from mandrel-bent stainless steel tubing, this system offers for dyno-proven power gains and an aggressive, performance-tuned sound. Features &...

Dual, 4-1/2" Black Stainless Steel Exhaust Tips: This dual rear-exit system features 4-1/2" round, double-wall, black clamp-on stainless steel exhaust tips w/ laser-etched Takeda logo for a custom appearance. Optional polished (PN...

Power, sound, and good looks is what this Takeda exhaust system delivers. The mandrel bent brushed finish stainless steel tubing keeps exhaust flowing smoothly for increased horsepower, torque, and an aggressive performance...

A simple 5 minute install gains you a huge increase in power. The aFe Power SCORCHER Module is designed to alter the pressure sensor signals to increase boost to an optimum level...

aFe introduces the MACH Force XP exhaust system for the BMW M5 F10 twin-turbo. In recent testing this system produced 18 horsepower and 30 lbs. x ft. of torque. This unique exhaust...

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased...