APR Gen 5 Haldex Upgraded Pressure Relief Valve Spring - Stage 2 - MS100267
The APR Stage 2 Spring Upgrade for Haldex is the hardware component that unlocks the full potential of APR’s AWD controller calibration for Gen 5 Haldex. Engineered as a direct replacement for...
APR 10-17 Audi S5 B8/B8.5 3.0T Ultracharger Throttle Body Upgrade - MS100128
The APR Ultracharger System dramatically increases horsepower and torque, and maximizes the power potential of the 3.0 TFSI. It removes a massive pre-supercharger restriction, allowing uninterrupted airflow into the supercharger for up...
APR 12-18 Audi A7 Quattro C7 3.0T Ultracharger Throttle Body Upgrade - MS100130
The APR Ultracharger System dramatically increases horsepower and torque, and maximizes the power potential of the 3.0 TFSI. It removes a massive pre-supercharger restriction, allowing uninterrupted airflow into the supercharger for up...
APR 14-17 Audi Q5/SQ5 3.0T Ultracharger Throttle Body Upgrade - MS100129
The APR Ultracharger System dramatically increases horsepower and torque, and maximizes the power potential of the 3.0 TFSI. It removes a massive pre-supercharger restriction, allowing uninterrupted airflow into the supercharger for up...
APR 76-83 Porsche 911 R1 DV Higher Pressure Spring - Blue - Z1001791
Fits Audi A4 97-06, A6 00-04, Allroad 01-05, RS6 03-04, S4 00-02, TT 00-06; Porsche 718 17-23, 911 76-19, 924 77-82, 930 78-79, 944 83-91, Cayenne 03-18, Macan 15-19, Panamera 10-16; VW...
APR Audi/Bentley/Lamborghini/Porsche/Volkswagen Valve Spring Kit - Single - MS100258
The APR Valve Spring System is a high performance, lightweight upgrade designed to increase valve control and eradicate valve float common on many applications. APR's design specifications called for a valve spring,...
APR 09-13 Audi A3 Quattro Catch Can (EA113 PCV Block Off Plate & Fittings Only) - MS100126
Designed for the DIY installers, the universal APR Catch Can System Block Off Plate is designed for use on vehicles where APR does not sell an application specific Catch Can System. The...
APR 11-18 Volkswagen Jetta Catch Can Kit - EA888.1 Jetta/GLI - MS100122
The APR Oil Catch Can System traps excessive crankcase oil vapors and gunk from entering the engine. The system eliminates a possible performance robbing boost leak, while reducing carbon buildup on intake...
APR Audi/Bentley/Lamborghini/Porsche/Volkswagen Universal Catch Can (Use w/AN Fittings) - MS100218
The APR Oil Catch Can traps excessive crankcase oil vapors and gunk from entering the engine. This helps to reduce carbon buildup on intake valves, octane lowering oil vapors and oil pooling...
APR 15-25 Audi/Volkswagen (EA888.3) 2.0T PCV Top Plate - MS100217
The APR PCV Top Plate is a factory-racecar-inspired-part that takes a multi-step approach to addressing several performance robbing issues, and critical engine safety concerns, with the factory system. This system include a...
APR 10-14 Volkswagen GTI Catch Can Kit - EA888.1 Golf/GTI - MS100121
The APR Oil Catch Can System traps excessive crankcase oil vapors and gunk from entering the engine. The system eliminates a possible performance robbing boost leak, while reducing carbon buildup on intake...
APR 15-19 Audi Q3 Catch Can Kit - MS100100
The APR Oil Catch Can System traps excessive crankcase oil vapors and gunk from entering the engine. The system reduces carbon buildup on intake valves, and octane lowering oil vapors and oil...
APR 12-13 Volkswagen Golf R Catch Can Kit - EA113 MK6 R (NAR) - MS100124
The APR Oil Catch Can System replaces the failure prone factory positive crank ventilation (PCV) system and traps excessive crankcase oil vapors and gunk from entering the engine. The system eliminates a...
APR 17-20 Audi RS3/12-22 Audi TT RS Quattro (DQ500) Transmission Catch Can & Breather System - MS100187
The Ultimate DQ500 DSG / S Tronic Transmission Catch Can and Breather System is here! The factory transmission features a plastic breather system that allows for transmission fluid expansion and removal of...
APR 15-26 Audi/Volkswagen (EA888.3 MQB) 1.8T/2.0T Full Catch Can Washer Reservoir - MS100199-A
Some vehicles have a washer fluid reservoir / fill neck located near the engine side motor mount, which blocks the install of our MS100199 Full Catch Can System. Our washer fluid reservoir...
APR 15-26 Audi/Volkswagen (EA888.3 MQB) 1.8T/2.0T Full Catch Can System - MS100199
The APR Catch Can System with PCV Plate is a comprehensive upgrade to your engine's Positive Crank Ventilation (PCV) system. This factory-racecar-inspired-system takes a multi-step approach to addressing several performance robbing issues,...
APR 01-12 Porsche 911 Catch Can Kit (w/ Norma Fittings) - MS100125
Designed for the DIY installers, the universal APR Catch Can Systems and Accessories are designed for use on vehicles where APR does not sell an application specific Catch Can System. The APR...
APR 16-18 Audi A7 Quattro 3.0 TFSI (Gen 2) Supercharger Pulley - Bolt On - MS100139
APR's Supercharger Drive and Crank Pulley Upgrades dramatically increase horsepower and torque by increasing the rotational speed of the factory supercharger. APR's Stage II Pulley ECU Upgrade makes the necessary engine management...
APR 12-18 Audi A7 Quattro 3.0 TFSI Supercharger Belt (1300 mm Length) - RS100002
Fits Audi A6 Quattro 09-18, A7 Quattro 12-18, A8 Quattro 13-18, Q5 13-17, Q7 11-15, S4 10-16, S5 10-17, SQ5 14-17 Features & Benefits Fits APR Drive Pulley and APR Crank Pulley...
APR 12-18 Audi A7 Quattro 3.0 TFSI Supercharger Belt (1270mm Length) - RS100001
Fits Audi A6 Quattro 09-18, A7 Quattro 12-18, A8 Quattro 13-18, Q5 13-17, Q7 11-15, S4 10-16, S5 10-17, SQ5 14-17 Features & Benefits Fits APR Drive Pulley and OEM Crank Pulley...
APR 16-18 Audi S6/S7/RS 7 (C7) 4.0T Exhaust Valve Extension Harness - RS100004
APR 16-18 Audi S6/S7/RS 7 (C7) 4.0T Exhaust Valve Extension Harness Features & Benefits High quality covers Weather protected Extends harness OEM connectors Downloads & Resources Video File (WEBM) Installation Instructions (PDF)
APR 15-18 Audi A6/A7/A8 Quattro (3.0 TFSI) Supercharger Drive & Crank Pulley w/Belt (Bolt On) - MS100185
APR's Supercharger Drive Pulley Upgrade decreases the diameter of the factory pulley from ~63.25mm to 57.75mm, which in turn spins the supercharger ~9.5% faster. This results in a healthy bump in horsepower...
APR 12-18 Audi A7 Quattro 3.0 TFSI Supercharger Pulley - Press On - MS100135
APR's Supercharger Drive and Crank Pulley Upgrades dramatically increase horsepower and torque by increasing the rotational speed of the factory supercharger. APR's Stage II Pulley ECU Upgrade makes the necessary engine management...
APR 12-18 Audi A7 Quattro 3.0 TFSI Supercharger Pulley Install Kit - MS100025
The APR Supercharger Drive Pulley Installation Kit is designed to encapsulate the entire pulley and pull evenly across its entire surface. The unit is compact enough to not require complete removal of...
APR 12-18 Audi A7 Quattro 3.0T 187mm Crank Pulley - MS100133
APR's Supercharger Drive and Crank Pulley Upgrades dramatically increase horsepower and torque by increasing the rotational speed of the factory supercharger. APR's Stage II Pulley ECU Upgrade makes the necessary engine management...
APR 09-18 Audi A6/A7/A8 Quattro (3.0 TFSI) Supercharger Drive & Crank Pulley w/Belt (Press On) - MS100184
APR's Supercharger Drive Pulley Upgrade decreases the diameter of the factory pulley from ~63.25mm to 57.75mm, which in turn spins the supercharger ~9.5% faster. This results in a healthy bump in horsepower...
APR 17-20 Audi RS3 Engine Cover Gloss - Carbon Fiber Twill - MS100234
We've added a new carbon fiber design that's drop dead gorgeous. Available in Gloss Carbon Fiber Twill, and Exotic Gloss Forged Carbon Fiber, the new covers are sure to turn heads. They...
APR 19-24 Audi A6 Quattro/S4/S5/S5 Sportback/S6/RS5 EA839 (B9) 2.9T/3.0T Carbon Fiber Engine Cover - MS100255
The 2.9T and 3.0T EA839 engine shares a beautiful engine cover platform, but only some of the RS models are upgraded with carbon fiber accents mixed with plastic. All other vehicles are...
APR 20-24 Audi Q7/Q8/RS Q8/SQ7/SQ8 (4M) 2.9T/3.0T/4.0T Forged Carbon Fiber Engine Cover - MS100257
Our carbon fiber engine cover is drop dead gorgeous. It's a mixture of premium matte forged carbon fiber, mixed with gloss forged carbon fiber to give a two tone look that's down...
APR 22-26 Audi A3 Quattro Engine Cover Gloss - Carbon Fiber Twill - MS100232
The 2.0T EA888.4 found in the MQB EVO / MK8 platform has possibly the most underwhelming engine cover to grace the 2.0T since its inception generations back. Some vehicles even came with...
APR 20-24 Audi Q7/Q8/RS Q8/SQ7/SQ8 (4M) 2.9T/3.0T/4.0T Twill Carbon Fiber Engine Cover - MS100256
Our carbon fiber engine cover is drop dead gorgeous. It's a mixture of premium matte carbon fiber, mixed with gloss carbon fiber to give a two tone look that's down right exotic....
APR 17-20 Audi RS3 Engine Cover Gloss - Forged Carbon Fiber - MS100235
We've added a new carbon fiber design that's drop dead gorgeous. Available in Gloss Carbon Fiber Twill, and Exotic Gloss Forged Carbon Fiber, the new covers are sure to turn heads. They...
APR 22-26 Audi A3 Quattro Engine Cover Gloss - Forged Carbon Fiber - MS100233
The 2.0T EA888.4 found in the MQB EVO / MK8 platform has possibly the most underwhelming engine cover to grace the 2.0T since its inception generations back. Some vehicles even came with...
APR 17-26 Audi RS3/12-22 Audi TT RS Quattro 2.5T Carbon Fiber Intake Manifold Cover Plate - MS100251
The 2.5T intake manifold has a couple different versions form the factory including a solid black plastic cover plate and a carbon fiber cover plate, both of which have factory badging. The...
APR 21-26 Audi RS6 Avant/RS7 Sportback EA825 (C8) 4.0T Carbon Fiber Engine Cover - MS100253
Our carbon fiber engine cover is drop dead gorgeous. It's a mixture of premium matte carbon fiber, mixed with gloss carbon fiber to give a two tone look that's down right exotic....
