Radium Engineering VW/Audi 1.8T 20V Fuel Rail - 20-0872
CNC machined aluminum fuel rail for the VW 1.8T 20-valve engine. Features 8AN ports. See product page at www.radiumauto.com for more information. Installation instructions available at www.radiumauto.com
Radium Engineering 14-19 Chevrolet Corvette Fuel Hanger Plumbing Kit w/ MicroglassFilter - 20-1011-05
Fuel hanger plumbing kit designed to be used with Radium in-tank fuel pump hanger. Includes lines, line brackets, fuel filter and all fittings necessary. 6 Micron microglass fuel filter element. Installation instructions...
Radium Engineering 08-15 Mitsubishi Lancer Evo X Fuel Pump Hanger - 20-1640
Newly redesigned in-tank fuel hanger for the Mitsubishi Evolution X. Can be used with single or dual pump. Pre-installed fittings compatible with factory fuel lines, but also includes fittings for 8AN feed...
Radium Engineering 90-99 Toyota MR2 3S-GTE Fuel Rail - 20-0849
CNC machined fuel rail for the 4-cylinder Toyota 3S-GTE engines. This fuel rail is equipped with four 8AN ORB ports, which can be used for plumbing and fuel accessories. Bolts directly to...
Radium Engineering R35 GT-R Transmission Filter Stainless - 18-0028
Made from stainless steel wire mesh and can be cleaned and reused INSTALLATION INSTRUCTIONS AVAILABLE AT RADIUMAUTO.COM
Radium Engineering 14-19 Chevrolet Corvette Fuel Hanger Plumbing Kit w/ Stainless Filter - 20-1011-03
Fuel hanger plumbing kit designed to be used with Radium in-tank fuel pump hanger. Includes all hoses, brackets and fittings. 10 Micron stainless mesh fuel filter element. Installation instructions available at www.radiumauto.com
Radium Engineering Toyota 2UZ-FE (Non VVTI) Fuel Rail Plumbing Kit - 20-0964
Radium Engineering Toyota 2UZ-FE (Non VVTI) Fuel Rail Plumbing Kit INSTALLATION INSTRUCTIONS AVAILABLE AT RADIUMAUTO.COM
Radium Engineering Fuel Hanger Evo X (No Pumps Included) Brushless Pumps - 20-1643
Newly redesigned in-tank fuel hanger for the Mitsubishi Evolution X. Compatible with Brushless fuel pumps. See website for additional information. Installation instructions available at www.radiumauto.com
Radium Engineering Ford Barra Fuel Rail - 20-1536
Billet aluminum fuel rail for the Ford Barra engines. High flow design with 8AN ORB ports. Compatible with alternative fuels. Different mounting brackets provided for compatibility with all Ford Barra engine variants:...
Radium Engineering Fuel Hanger Evo X (No Pumps Included) Walbro F90000274/285 - 20-1642
Newly redesigned in-tank fuel hanger for the Mitsubishi Evolution X. Can be used with single or dual pump. Compatible with Walbro F90000-series fuel pumps (aka Walbro 450 and similar). Pre-installed fittings compatible...
Radium Engineering DSV Valve Extension Adapter - 20-1035
Compatible with all models of Radium Fuel Cell Surge Tanks. Elevates the vent valve to allow more filling before DSV float ball shuts off the air vent.
Radium Engineering Remote Mount Filler Adapter 1.5in - 20-1015
Bolt-on fuel filler adapter for use with 1.5" filler hose. Compatible with Radium part number 20-1004-V and 20-1005-V. INSTALLATION INSTRUCTIONS AVAILABLE AT RADIUMAUTO.COM
Radium Engineering 6AN Orb Swivel Banjo 8.5mm Barb to 6AN Male Bulkhead - 20-1000-0606-85
This low profile swiveling fitting screws into a 6AN ORB port where an 8.5mm hose can attach to the fitting. Has swivel 6AN male. Safe for use with all types of fluid....
Radium Engineering Top Feed Upgrade Subaru EJ22/EJ251 - 20-0869-02
CNC Machined fuel rails for Subaru EJ engines. Check website for vehicle application information. 8AN ORB ports with an auxiliary port located on the bottom of the fuel rails. Compatible with Radium...
Radium Engineering FHST Extension Add-on Audi R8 Type-4S Lamborghini Huracan - 20-0868
Adds volume to the Fuel Hanger Surge Tank kit 20-0860. Includes offset housing and necessary hardware. Installation instructions available at www.radiumauto.com
Radium Engineering 08-16 Mitsubishi Evo X Fuel Hanger Return - 20-0249
Provides all necessary hose, fittings, and hardware to convert the OEM Evo X fuel feed line to be used as the return line INSTALLATION INSTRUCTIONS AVAILABLE AT RADIUMAUTO.COM
Radium Engineering 90-95 Acura NSX Fuel Hanger Plumbing Kit - 20-2795
Fuel hanger connection kit designed to be used with Radium in-tank fuel pump hanger for the Acura NSX. Connects from the fuel hanger fittings to the factory hard lines under the vehicle....
Radium Engineering Remote Mount Fuel Filler 2.25in Vented - 20-1205-V
Remote mounted fuel filler point. Standard filling, features a screw off lid. Backside features a 2.25" hose barb connection.
Radium Engineering 90-93 Acura Integra/88-91 Civic CRX Fuel Hanger Plumbing Kit - 20-1795
Fuel hanger connection kit designed to be used with Radium in-tank fuel pump hanger for the Integra and Civic. Connects from the fuel hanger fittings to the factory hard lines under the...
Radium Engineering Remote Mount Vented Standard Filler 1.5in Elbow - 20-1105-V
Remote mounted fuel filler point. Standard filling, features a screw off lid. Backside features a 24AN male with a 75 degree angled neck for 1.5" ID filler hose attachment. 1.5" neck attaches...
Radium Engineering 10AN Orb Swivel Banjo TO 12MM SAE Male - 20-1000-1012S
This 90 degree swivel fitting screws into a 10AN ORB female port and has a male SAE 12mm quick connect fitting. Compatible with all fuels and oils.
Radium Engineering 8AN Orb Swivel Banjo TO 12MM SAE Male - 20-1000-0812S
This 90 degree swivel fitting screws into a 8AN ORB female port and has a male SAE 12mm quick connect fitting. Compatible with all fuels and oils.
Radium Engineering Remote Mount - Vented Female Dry Break Fuel Fillers 2.25in - 20-1204-V
Female dry break receptacle for mounting on exterior body work of vehicle. Back side features a 2.25" hose barb connection. Only compatible with Radium dry break systems. INSTALLATION INSTRUCTIONS AVAILABLE AT RADIUMAUTO.COM
Radium Engineering Remote Mount Vented Female Dry Break 1.5in Elbow - 20-1104-V
Female dry break receptacle for mounting on exterior body work of vehicle. Back side features a 75 degree angled 1.5" diameter elbow connected with a 24AN interface. Elbow can be positioned in...
Radium Engineering 2011+ Ford Mustang Fuel Hanger Fits Walbro GSS342 or AEM 50-1200 Pumps - 20-1800
Drop-in fuel pump hanger for the 2011+ Ford Mustang. Regulator integrated in top hat, but can be bypassed with kit 20-0806. Pumps not included and must be purchased separately. Compatible with Walbro...
Radium Engineering 2011+ Ford Mustang Fuel Hanger Fits TI Automotive Brushless E5LM Pumps - 20-1801
Drop-in fuel pump hanger for the 2011+ Ford Mustang. Regulator integrated in top hat, but can be bypassed with kit 20-0806. Pumps not included and must be purchased separately. Compatible with Ti...
Radium M12X1.25 SWIVEL BANJO TO 6AN MALE - 20-1000-M1206
Stainless steel and aluminum construction. Screws into a M12 threaded female port and provides a 6AN male fitting that swivels 360 degrees. Suitable for all fluid types.
Radium 14-19 Corvette Fuel Hanger (Pumps Not Included) - 20-1010
In-tank fuel pump hanger for the 2014-2019 Chevrolet Corvette. Compatible single aftermarket fuel pump (sold separately). Can add a second fuel pump using kit 20-0937 (sold separately). Compatible with E85. Installation instructions...
Radium Engineering 12AN swivel ORB Banjo To 12AN Male Fitting - 20-1000-1212
Stainless steel and aluminum construction. Screws into a 12AN ORB female port and provides a 12AN male flare that swivels 360 degrees. Suitable for all fluid types.
Radium Engineering 12AN ORB Banjo To 3/4AN SAE Male Fitting - 20-1000-12750
Stainless steel body, aluminum top. 360 degree swivel action. Installs into 12AN ORB port.
Radium 11-Up Ford Mustang Fuel Hanger - Pumps Not Included Walbro F90000274/285 or DW400 - 20-1802
In-tank fuel pump hanger for the 2011+ Ford Mustang (all). Compatible with certain aftermarket fuel pumps. Integrated fuel pressure regulator. Can be converted to remote fuel pressure regulator (return system) if desired...
Radium Engineering 2015+ Subaru WRX Air Oil Separator Kit (INCLUDES 20-0255) - 20-0258-00
Radium Engineering 2015+ Subaru WRX Air Oil Separator Kit (INCLUDES 20-0255) INSTALLATION INSTRUCTIONS AVAILABLE AT RADIUMAUTO.COM
Radium Engineering 2015+ Subaru WRX/STI Master Cylinder Brace - 20-0255
CNC Machined aluminum. Anodized and laser engraved. Easy bolt-in installation. INSTALLATION INSTRUCTIONS AVAILABLE AT RADIUMAUTO.COM
Radium Engineering 2015+ Subaru WRX Fuel Feed Line Kit - 20-0266
Replaces OEM fuel feed tube on the firewall to the engine INSTALLATION INSTRUCTIONS AVAILABLE AT RADIUMAUTO.COM
Radium Engineering Toyota 1JZ-GTE non-VVTi Engine Top Feed Fuel Rail - 20-0235
Radium Engineering Toyota 1JZ-GTE non-VVTi Engine Top Feed Fuel Rail INSTALLATION INSTRUCTIONS AVAILABLE AT RADIUMAUTO.COM
Radium Engineering 06-11 Elise/Exige 2ZZ-GE ONLY Coolant Expansion Tank- Remote Location - 20-0270-02
Radium Engineering 06-11 Elise/Exige 2ZZ-GE ONLY Coolant Expansion Tank- Remote Location INSTALLATION INSTRUCTIONS AVAILABLE AT RADIUMAUTO.COM
