AutoTecknic Dry Carbon Key Case - Audi B8 A4 / 8T A5 / 8R Q5 / C7 A6 / 4G A7 / D4 A8

You pick up your key every time you drive, and the factory Audi fob shows it fast: scratches, scuffs and worn chrome. The AutoTecknic Dry Carbon Key Case wraps the Audi smart key used on the 2008-2018 A4, A5, Q5, A6, A7 and A8 in real 3K twill carbon fiber, so the first thing in your hand matches the car it starts.

This is 100% genuine dry carbon fiber with a high-gloss clear coat, not a printed pattern or a plastic shell with carbon film. It adds almost no bulk, protects the factory key, and clips on in seconds with no tools.

Check your key before you order: compare your key to the photos on this page. This case fits the Audi smart key with three stacked buttons, the four rings at the bottom and a chrome end cap. If your key has a flip-out blade (A3, Q3, TT, R8, 2007-2015 Q7, and the older A4 and A6), this case will not fit. Shop our Dry Carbon Key Case for Audi flip keys instead. Not sure which key you have? Contact us with your car's year and model before you order and we'll confirm fit.

Dry Carbon Key Case Built for the Audi Smart Key

Each case is shaped around the factory smart key, so it sits flush instead of rattling around like a universal cover. The open-face design leaves every button uncovered and is built to preserve keyless range with the Audi advanced key system. The two halves clip together around the key, and the original chrome end cap stays visible.

What's Included

• 1 x Dry carbon remote key case (two-piece clip-on shell)

Key Features

• 100% genuine dry carbon fiber in 3K twill weave, not a wrap or printed pattern
• High-gloss clear coat finish
• Shaped for the Audi smart key used on 2008-2018 A4, A5, Q5, A6, A7 and A8
• Open-face design keeps all buttons uncovered
• Tool-free two-piece clip-on install

Vehicle Fitment

Fits Audi models with the smart key shown in the photos:

• A4 / S4 / allroad B8 (2009-2016)
• A5 / S5 / RS5 8T (2008-2017)
• Q5 / SQ5 8R (2009-2017)
• A6 / S6 C7 (2012-2018)
• A7 / S7 / RS7 4G (2012-2018)
• A8 / S8 D4 (2011-2018)

Not compatible with Audi flip keys (A3, Q3, TT, R8, 2007-2015 Q7, B7 A4 and C6 A6). For those, see the AutoTecknic Dry Carbon Key Case for Audi flip keys. Also not compatible with the newer Audi key used on the B9 A4, F5 A5, FY Q5, 4M Q7 and the 2019+ A6, A7 and A8.

Installation Notes

No tools needed. It takes about a minute.

1. Separate the two halves of the key case.
2. Set your factory key into the front half, buttons facing out.
3. Line up the back half and press until it clips shut all the way around.

Fitment has not been independently verified for your vehicle. Confirm the manufacturer application against your year, make, model, trim, and modifications before ordering.

Processing and carrier timing vary by stock status and destination. Final shipping services and costs are confirmed at checkout.

Shipping policy · Returns policy