Mishimoto 2024+ Toyota Tacoma Recovery Points - Front - Black - MMTH-TAC-24-FBK

When a recovery situation hits on a remote trail, the weakest point in the system determines the outcome. The Mishimoto Front Recovery Points for the 2024+ Toyota Tacoma are built to not be that point - forged alloy steel construction rated at 17,000 lbs working load limit each, engineered for the full spectrum of modern recovery loads from static pulls to kinetic rope extractions.----Forged alloy steel aligns the grain structure of the metal, delivering tensile strength that resists bending and cracking under dynamic recovery forces where cast or stamped recovery points give way. Recessed bolt heads sit flush with the recovery point surface, eliminating the hardware exposure that causes bolt-head shear when the front end contacts a rock or obstacle. Electrogalvanizing seals the steel before powder coat is applied, blocking moisture and salt at the base metal for long-term corrosion resistance. Black dacromet hardware carries the same corrosion protection through every fastener, preventing rust migration and seizing at the mounting interface.----The opening geometry accepts both d-ring and soft shackles without modification, supporting either steel or synthetic rigging hardware. Available in powder coat black or red. Direct fit for the 2024+ Toyota Tacoma with no drilling, cutting, or modification required.----For complete front and rear recovery capability, pair with the Mishimoto Rear Recovery Points (MMTH-TAC-24-R), rated at 18,500 lbs WLL each and built with the same forged alloy steel construction for the rear bumper mounting location. Backed by the Mishimoto Lifetime Warranty.

Features & Benefits

• Rated at 17,000 lbs working load limit each - forged alloy steel construction delivers the extraction capacity for full-size vehicle recovery on technical terrain, where under-rated recovery points fail at the worst possible moment.
• Recessed bolt heads eliminate a shear point - flush-mounted fasteners sit below the surface, removing the hardware exposure that shears bolt heads on rock and trail contact.
• Two-stage coating protects the whole assembly - electrogalvanized steel and dacromet-coated hardware block moisture and salt at the body and every fastener.
• Forged alloy steel resists bending and cracking - forging aligns the metal’s grain structure for greater tensile strength than cast or CNC alternatives.
• Accepts both d-ring and soft shackles - the opening geometry works with steel or synthetic rigging hardware without modification.
• Drops in without modification - confirmed direct fit for the 2024+ Toyota Tacoma, no drilling or cutting required.
• Own it for life - backed by Mishimoto’s Lifetime Warranty, your investment is protected long after install day.

Downloads & Resources

• User 1 (PDF)

Fitment has not been independently verified for your vehicle. Confirm the manufacturer application against your year, make, model, trim, and modifications before ordering.

Processing and carrier timing vary by stock status and destination. Final shipping services and costs are confirmed at checkout.

Shipping policy · Returns policy